Natural Microsystems AG4000 & Quad T1 setup

TelSwitch Inc. has experienced flexibility and stability in maintaining its’ IXC-10 Canvas platforms according to the following NMS configuration files. Any questions may be directed toward TelSwitch Inc.

c:\nms\oam\cfg\oamsys.cfg – example of a the config file which references setup instructions.

contents of file c:\nms\oam\cfg\oamsys.cfg
#---------------------------------------------------------
# sample.cfg
#
# Sample OAM configuration file generated by oamgen
# based on the NMS boards found in this chassis.
#
# To boot the NMS boards in this chassis, use the command:
#      oamsys -f sample.cfg
#
# You may need to modify the keyword configuration files
# on the "File = XXXX.cfg" lines to suit your needs.
#---------------------------------------------------------
[Name0]
 Product = AG_4000_4T1
 Number = 0
 Bus = 0
 Slot = 8
 File = c:\nms\ag\cfg\trunks.cfg
# File = c:\nms\ag\cfg\agi4t1pi.cfg

c:\nms\ag\cfg\trunks.cfg – example of trunk configuration for maintaining loopstart, winkstart, and ISDN trunks on the same board.

#--------------------------------------------------------------
# Originally created from input file usa\a4fgd.cfg.
# Detailed board settings for:
#    Product = AG_4000_4T1
#--------------------------------------------------------------

TCPFiles[0] = nocc.tcp	# NO-call control
TCPFiles[1] = isd0.tcp	# ISDN
TCPFiles[2] = fgd0.tcp  # Feature Group D
TCPFiles[3] = wnk0.tcp  # Wink Start TCP
TCPFiles[4] = lps0.tcp  # Loopstart protocol

LoadFile = ag4000.lod
RunFile = ag4000.cor    # the core runfile

#Buffers[0].Size = 12000

DLMFiles[0] = gtp.leo    # call control functionality
DLMFiles[1] = voice.leo    # voice management
DLMFiles[2] = svc.leo    # service functions
DLMFiles[3] = isdndms.leo   # use with "Northern Telecom DMS100"
# DLMFiles[3] = isdnni2.leo   # use with "US National ISDN 2"
# DLMFiles[3] = isdn4ess.leo    # use with "AT&T 4ESS"
# DLMFiles[3] = isdn5ess.leo  # use with "AT&T 5ESS"
# DLMFiles[3] = isdnhkt.leo   # use with "Hong Kong Telephone"
# DLMFiles[3] = isdnntt.leo   # use with "Nippon Telegraph Telephone"
# DLMFiles[3] = isdnni2.leo   # use with "US National ISDN 2"
# DLMFiles[3] = isdntwn.leo   # use with "Taiwanese Operator"

#   Note: the companding law the DSPs will follow is determined by default
#         by the OAM service.
#         For an AG 4000 T, it's Mu-law.  If you want to change it, you need
#         to have the following:
#   DSP.C5x.Lib = ag2liba.r54  # to force A-law in-band processing
#   DSP.C5x.Lib = ag2libu.r54  # to force Mu-law in-band processing

# DSP (.m54) files to link in
# DSP.C5x.DSPFiles[x] = echo.m54   # Change [x] with the proper number when needed
# DSP.C5x.DSPFiles[x] = oki.m54    # Change [x] with the proper number when needed
# DSP.C5x.DSPFiles[x] = rvoice.m54 # Change [x] with the proper number when needed
# DSP.C5x.DSPFiles[x] = wave.m54   # Change [x] with the proper number when needed

XLaw = MU-LAW

Clocking.HBus.ClockMode          = STANDALONE
Clocking.HBus.ClockSource = NETWORK	# take the clock from the network
Clocking.HBus.ClockSourceNetwork = 1    # take the clock from the network

DSP.C5x.DSPFiles[0] = mf
DSP.C5x.DSPFiles[1] = callp
DSP.C5x.DSPFiles[2] = tone
DSP.C5x.DSPFiles[3] = dtmf
DSP.C5x.DSPFiles[4] = ptf
DSP.C5x.DSPFiles[5] = voice.m54
DSP.C5x.DSPFiles[6] = wave.m54   # Change [x] with the proper number when needed

# DSP.C5x[0..15].Files = callp ptf tone dtmf voice

NetworkInterface.T1E1[0..0].FrameType = ESF
NetworkInterface.T1E1[0..0].LineCode = B8ZS
NetworkInterface.T1E1[1..1].FrameType = ESF
NetworkInterface.T1E1[1..1].LineCode = B8ZS
NetworkInterface.T1E1[2..2].FrameType = ESF
NetworkInterface.T1E1[2..2].LineCode = B8ZS
NetworkInterface.T1E1[3..3].FrameType = ESF
NetworkInterface.T1E1[3..3].LineCode = B8ZS

#NetworkInterface.T1E1[0..0].SignalingType = PRI
#NetworkInterface.T1E1[0..0].D_Channel     = ISDN

NetworkInterface.T1E1[1..1].SignalingType = PRI
NetworkInterface.T1E1[1..1].D_Channel     = ISDN

#NetworkInterface.T1E1[2..2].SignalingType = PRI
#NetworkInterface.T1E1[2..2].D_Channel     = ISDN

#NetworkInterface.T1E1[3..3].SignalingType = PRI
#NetworkInterface.T1E1[3..3].D_Channel     = ISDN

c:\nms\startisdn.bat - example of how to run the ISDN (DMS-variant) of the D channel for ISDN trunking.

echo start /MIN isdncta -b0 -a0 -o8 -c1
start /MIN isdncta -b0 -a1 -o8 -c1
echo start /MIN isdncta -b0 -a2 -o8 -c1
echo start /MIN isdncta -b0 -a3 -o8 -c1